Dimensions/Weights/ Clearance
Table 1: Unit weights
| Shipping | Shipping |
Size | Weight | Weight |
| with pallet (lb) | w/o pallet (lb) |
| WPVJ |
|
|
|
|
018 | 249 | 239 |
024 | 250 | 240 |
|
|
|
030 | 298 | 288 |
036 | 315 | 305 |
|
|
|
042 | 324 | 314 |
048 | 398 | 388 |
|
|
|
060 | 439 | 429 |
072 | 440 | 430 |
|
|
|
| WPHF |
|
021, 027 | 279 | 267 |
|
|
|
035. 040 | 367 | 356 |
047, 057 | 433 | 403 |
|
|
|
WARNING
Improper Unit Lift!
Test lift unit approximately 24 inches to verify proper center of gravity lift point. To avoid dropping of unit, reposition lifting point if unit is not level. Failure to properly lift unit could result in death or serious injury or possible equipment or
Unit Location and Clearances Locate the unit in an indoor area. The
ambient temperature surrounding the unit must not be less than 45°F. Do not locate the unit in areas subject to freezing.
Attention should be given to service clearance and technician safety. The unit should be easily maintained or serviced in all applications. There must be enough space for service per- sonnel to perform maintenance or re- pair. Provide sufficient room to make
Figure 1: Mechanical clearances - WPHFwater, and electrical connection(s). Lo- cal and national codes should be fol-
lowed in providing electrical power connections. See Figure 1 and 2 for mechanical clearances.
Figure 2: Mechanical clearances - WPVJ
6 |