Brinkmann 2500 owner manual Gas Stainless Steel Outdoor Grill

Page 1

Gas Stainless Steel

Outdoor Grill

OWNER’S MANUAL

ASSEMBLY AND OPERATING INSTRUCTIONS

SAVE THIS MANUAL FOR FUTURE REFERENCE

NOTICE TO INSTALLER:

LEAVE THESE INSTRUCTIONS

WITH THE GRILL OWNER FOR

FUTURE REFERENCE.

WARNING

HAZARDOUS EXPLOSION MAY

RESULT IF THESE WARNINGS AND INSTRUCTIONS ARE IGNORED. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO AVOID PERSONAL INJURY, INCLUDING DEATH OR PROPERTY DAMAGE.

GRILL LIGHTING INSTRUCTIONS:

1.Read and follow all warnings and instructions in owner’s manual before lighting.

2.Open lid before lighting burner.

3.Make sure all control knobs are in the OFF position.

4.Select the burner to be lit. Push and turn the control knob of that burner to HIGH.

5.Press the electronic igniter and hold for 3-5 seconds to light burner.

6.If burner does NOT ignite immediately, turn control knob to OFF, wait 5 minutes to allow gas to dissipate and repeat lighting procedure.

7.Repeat Steps 4-6 for lighting each burner. Always use electronic igniter for lighting each burner.

8.Refer to owner’s manual for match lighting procedure.

9.For assistance, call 1-800-527-0717.

10.To turn off, turn control knobs clockwise until it locks in OFF position.

SIDE BURNER LIGHTING INSTRUCTIONS:

1.Read and follow all warnings and instructions in owner’s manual before lighting.

2.Open lid before lighting side burner.

3.Make sure all control knobs are in the OFF position.

4.Push and turn side burner control knob to HIGH.

5.Press the electronic igniter and hold for 3-5 seconds to light burner.

MAXIMUM SIDE BURNER LOAD = 15 lbs.

6.If burner does NOT ignite immediately, turn control knob to OFF, wait 5 minutes to allow gas to dissipate and repeat lighting procedure.

7.Refer to owner’s manual for match lighting procedure.

8.For assistance, call 1-800-527-0717.

9.To turn off, turn control knob clockwise until it locks in OFF position.

FOR OUTDOOR USE ONLY

Image 1
Contents Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingTransporting and Storage Cleaning and MaintenanceBefore Storing Your Grill HardwareCastings Burner ASSEMBLY/MAINTENANCECooking Grills Problem Possible Causes Burner will not light Trouble ShootingGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using four M6 X 50mm bolts Grease Tray Bracket Grill Body Install door bracket using four Screw Holes Gas Hose Brass Nut Electrode Grill Bottom Grease Tray Place warming rack in slots above cast iron cooking grills Pro Series 2500 Assembled Accessories Gallon PAN & Basket SET Warranty