Brinkmann 2500 owner manual Rotisserie Cooking, Side Burner

Page 13

ROTISSERIE COOKING:

Your grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (sold separately). Do not use a rotisserie not specifically manufactured for this grill.

Read and follow all instructions provided with the rotisserie. Save instructions for future reference.

Do not use the side burner when using a rotisserie.

WARNING

When using an AC current rotisserie, it must be electrically grounded in accordance with local codes, or in the absence of local codes:

In the US: The National Electrical Code – ANSI-NFPA No. 70 – Latest Edition

In Canada: the Canadian Electrical Code – CSA C22.1

Only use a Brinkmann Rotisserie manufactured specifically for use with this grill.

The Rotisserie is equipped with a three pronged plug for your protection against electrical shock. This plug should be plugged directly into a properly grounded 3 prong receptacle. Never cut or remove the grounding plug. Any extension cord must also have a 3 prong receptacle.

All electrical supply cords should be kept away from water and any hot surfaces of the grill.

USING OTHER FEATURES OF THE GRILL:

THE SIDE BURNER:

The side burner can be used to prepare side dishes such as beans, potatoes, corn, or to warm sauces.

The burner valve can be adjusted from high to low depending upon your cooking demands.

WARNING

Read instructions on lighting your grill to light the side burner.

Never close the side burner cover when the burner is lit.

Use a 10" diameter pot or smaller that does NOT have an extended handle when cooking on the side burner. Center pot over burner.

Never place more than 15 pounds on the side burner. The side burner is not constructed to hold weight exceeding 15 pounds.

Use caution to avoid bumping grill, side burner or pot to prevent pot from spilling contents possibly leading to severe burns.

DO NOT use side burner to deep fry food in oil to avoid dangers associated with oil igniting creating a very dangerous situation.

12

Image 13
Contents Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingTransporting and Storage Cleaning and MaintenanceBefore Storing Your Grill HardwareCastings Burner ASSEMBLY/MAINTENANCECooking Grills Problem Possible Causes Burner will not light Trouble ShootingGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using four M6 X 50mm bolts Grease Tray Bracket Grill Body Install door bracket using four Screw Holes Gas Hose Brass Nut Electrode Grill Bottom Grease Tray Place warming rack in slots above cast iron cooking grills Pro Series 2500 Assembled Accessories Gallon PAN & Basket SET Warranty