Brinkmann 2500 owner manual Place warming rack in slots above cast iron cooking grills

Page 28

Step 15

Place the porcelain coated heat shields on lower level of grill body assembly directly above burners.

Step 16

Place porcelain cast iron cooking grills on support ribs directly above porcelain heat shields.

Step 17

Place warming rack in slots above cast iron cooking grills.

Warming Rack

Cooking Grills

Porcelain Heat

Shields

GRILL LIGHTING INSTRUCTIONS:

 

 

 

 

1.

Read and follow all warnings and instructions

5.

Press the electronic igniter and hold for 3-5

7.

Repeat Steps 4-6 for lighting each burner. Always

 

in owner’s manual before lighting.

 

seconds to light burner.

 

use electronic igniter for lighting each burner.

2.

Open lid before lighting burner.

6.

If burner does NOT ignite immediately, turn control

8.

Refer to owner’s manual for match lighting procedure.

3.

Make sure all control knobs are in the OFF position.

 

knob to OFF, wait 5 minutes to allow gas to

9.

For assistance, call 1-800-527-0717.

4.

Select the burner to be lit. Push and turn the control

 

dissipate and repeat lighting procedure.

10. To turn off, turn control knobs clockwise until it locks

 

knob of that burner to HIGH.

 

 

 

in OFF position.

FOR OUTDOOR USE ONLY

27

Image 28
Contents Gas Stainless Steel Outdoor Grill Important Safety For Your SafetyPage Installation Information Cylinder SpecificationsPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Operating the Grill Breaking in Your GrillPreheating the Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerCleaning and Maintenance Transporting and StorageBefore Storing Your Grill HardwareCastings Burner ASSEMBLY/MAINTENANCECooking Grills Trouble Shooting Problem Possible Causes Burner will not lightGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using four M6 X 50mm bolts Grease Tray Bracket Grill Body Install door bracket using four Screw Holes Gas Hose Brass Nut Electrode Grill Bottom Grease Tray Place warming rack in slots above cast iron cooking grills Pro Series 2500 Assembled Accessories Gallon PAN & Basket SET Warranty