NOTE: Inside view of Lower Grill Housing
Venturi Tubes
Inside view of Lower Grill Housing
Burner
Bottom - Outside view of Lower Grill Housing
Step 18
Mount lower grill housing onto upper grill frame using four M6 X 35 bolts and M6 X 5 hex nuts.
Step 19
Remove four bolts from burner supports on bottom of burner. Insert the grill burner into the lower grill housing by sliding Venturi tubes through the large square opening in the bottom of the housing. The gas collector and electrode should face towards the front of the grill. The Venturi tube ends should fit over the valve manifold ends. The holes on manifold have been offset for proper installation.
NOTE: Manifold will have offset holes and can only be installed by aligning holes in manifold with holes in control panel.
Venturi Tubes
Step 20
Secure burner to lower grill housing using the four bolts that were removed previously from the burner in Step 19.
24