Brinkmann Outdoor Gas Grill owner manual Step

Step 21

Place hood on top of lower grill housing and insert hinge pins through upper and lower hinges, then secure with cotter pins. Bend ends of cotter pin around hinge pin to secure.

Step 22

Attach one handle stand using two M6 X 12 bolts and M6 X 5 hex nuts. Next insert hood handle by sliding into stand. Place the other handle stand over handle and attach it by using two M6 X 12 bolts and M6 X 5 hex nuts.

Step 23

Insert hanging rack into pivot boss on left side of hood interior. Insert into pivot boss on right by flexing pivot wire on the hanging rack.

Hinge and Cotter Pins

Handle

Handle Support

M6 X 12 Bolts

Pivot Boss

Inside view of Grill Hood

Hanging Rack

25