Brinkmann Portable Tailgate Gas Grill Cleaning and Maintenance, Burner ASSEMBLY/MAINTENANCE

Page 15

CLEANING AND MAINTENANCE:

Keep the appliance free and clear of combustible materials, gasoline and other flammable vapors and liquids.

Keep the ventilation openings of the cylinder enclosure free and clear of debris.

Visually check burner flames for proper operation (see pictorial in "Burner Assembly/Maintenance" under Proper Care and Maintenance). Spiders or other insects can nest in the burner causing gas blockage.

For safe grilling and peak performance of your grill, perform these checks at least twice per year or after extended periods of storage.

Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.

CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.

Remove the cooking grills, heat distribution plates, and burners from inside your grill. Use a brush with hot water and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse completely with water. Towel dry and replace all components as described in the assembly instructions.

BURNER ASSEMBLY/MAINTENANCE

Although your burners are constructed of stainless steel, they may corrode as a result of the extreme heat and acids from cooking foods. Regularly inspect the burners for cracks, abnormal holes, and other signs of corrosion damage. If found, replace the burner.

DO NOT obstruct the flow of combustion and ventilation air. Burner tubes can become blocked by spiders and other insects building their nests. Blocked burner tubes can prevent gas flow to the burners and could result in a burner tube fire or fire beneath the grill. To clean the Burner Assembly follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting the grill.

1.Turn gas off at control knobs and LP cylinder tank valve.

2.Remove cooking grills and heat distribution plates.

3.Remove screw from each burner "foot" using a screwdriver.

4.Carefully lift each burner up and away from valve openings.

5.Use a narrow bottle brush or a stiff wire bent into a small hook to run through each burner tube and flame port several times.

Note: Wear eye protection when performing procedure 6.

6.Use compressed air to blow into burner tube and out the flame ports. Check each port to make sure air comes out each hole.

Debris

Valve Nozzle

7. Wire brush entire outer surface of burner to remove food residue and dirt.

8.

Check burner for damage, if any large cracks or holes are found

 

Crossover Channel

 

replace burner.

 

 

Burner Opening

 

IMPORTANT: Burner opening must slide over valve nozzle.

 

 

Burner Screw

9.

Orient burners CORRECTLY by aligning screw hole in burner to the left as shown.

Aligned Left

 

 

 

Note: Make sure burner tubes align evenly between crossover channels.

10. Replace screw on each burner and follow the "Gas Leak Testing" section of this manual. Relight burners to verify proper operation.

11. Replace heat distribution plates and cooking grills.

PROPER BURNER OPERATION

 

14

Image 15
Contents Aviso Para EL Instalador Important Safety Table of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Hose and Regulator Installing the LP GAS Cylinder Onto the GrillRegulator Resetting Procedure Filling the LP GAS CylinderConnecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderLeak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the Main BurnersMatch Lighting the Main Burners Turning OFF the Grill Controlling FLARE-UPS Operating the GrillBreaking in Your Grill Preheating the GrillCleanliness Grilling to Proper TemperatureHelpful Hints Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceBefore Storing Your Grill Cooking GrillsHeat Distribution Plates Transporting and StorageTrouble Shooting Frequently Asked Questions Frequently Asked Questions Assembly Instructions Page Step Step Step Brinkmann Tailgate Grill Assembled Importantes Advertencias DE Seguridad Índice Advertencias Generales Información DE Instalación Especificaciones DEL Cilindro Llenado DEL Cilindro DE GAS DE Propano Líquido Manguera Y ReguladorProcedimiento DE Reposición DEL Regulador Conexión DE LA Manguera Y Regulador Pruebas DE Detección DE Fugas Cuándo Realizar UNA Prueba DE Detección DE FugasVerificación DE Ausencia DE Fugas ¡PRECAUCIÓN Lista DE Verificación Preliminar AL EncendidoInstrucciones DE Encendido Encendido DE LAS Hornillas PrincipalesEncendido DE LAS Hornillas Principales CON UN Cerillo Apagado DE LA Parrilla ¡CUIDADOControl DE LAS Llamaradas Operación DE LA ParrillaPreparación DE LA Parrilla Para Usarla POR Primera VEZ Precalentamiento DE LA ParrillaLimpieza Cocinar a LA Parrilla a LA Temperatura ApropiadaRecomendaciones Útiles INSTALACIÓN/MANTENIMIENTO DE LAS Hornillas Limpieza Y MantenimientoAntes DE Guardar LA Parrilla Rejillas Para CocinarPlacas DE Distribución DEL Calor Transporte Y AlmacenajeIdentificación Y Corrección DE Problemas Preguntas Frecuentes Preguntas Frecuentes Instrucciones DE Armado Page Paso Paso Paso Brinkmann Tailgate Grill Armada Accessories Accesorios Warranty

Portable Tailgate Gas Grill specifications

The Brinkmann Portable Tailgate Gas Grill is an exceptional choice for grill enthusiasts who prioritize mobility without sacrificing performance. This compact grill is designed for use at tailgates, picnics, or camping trips, providing a reliable cooking solution with the convenience of gas-powered grilling.

One of the standout features of the Brinkmann Portable Tailgate Grill is its robust construction. Built with a durable stainless steel body, it ensures longevity and resistance to rust, making it suitable for outdoor use. The grill boasts a sleek, modern design that not only looks good but also performs exceptionally well in various conditions.

The grilling surface measures a generous 210 square inches, offering ample space to cook for friends and family. With dual burners, the Brinkmann grill delivers an impressive total output of around 20,000 BTUs. This powerful capability ensures that the grill heats up quickly and maintains consistent temperatures, allowing for even cooking of meats and vegetables.

Convenience is a key aspect of the Brinkmann Portable Tailgate Gas Grill. It features an easy push-button igniter for quick startups, eliminating the need for matches or lighter fluid. The grill also comes equipped with adjustable burners, allowing users to personalize their cooking experience based on specific needs or preferences.

Portability is at the heart of this grill's design. Weighing in at approximately 20 pounds and featuring a compact folding mechanism, it can easily be transported in the trunk of a car or carried by hand. Additionally, the sturdy legs provide stability on various surfaces, ensuring that grilling can occur anywhere, anytime.

Moreover, the Brinkmann grill includes a grease collection system that helps keep the cooking area clean. The removable grease tray captures drippings and is easy to clean after use, allowing for hassle-free maintenance.

Safety features such as a locking lid design ensure that the grill remains secure during transport, while heat-resistant handles provide protection from burns. For any outdoor enthusiast looking for a grill that combines portability, functionality, and style, the Brinkmann Portable Tailgate Gas Grill proves to be an excellent choice, promising delicious meals on the go. This grill not only caters to the needs of the occasional user but also meets the standards of the dedicated grilling aficionado.