Brinkmann 810.63450 owner manual Step

Step 18

Attach the side burner assembly to the right side of the grill body. Insert two M6 x 12mm bolts into both right legs halfway. Place side burner assembly over bolts and slide toward front of grill, then tighten securely. Fasten side burner front panel to grill body with one M6 X 12mm bolt.

Step 19

Attach the hose heat shield

(Item #28) to the right cart frame (Item #20) using two #8 self-tapping screws.

Step 20

Remove two screws and washers from the side burner valve. Insert the

side burner valve assembly through the hole in the side burner front

panel (Item #16), then firmly seat the valve nozzle into the burner

venturi. Hold in place while you perform Step 23.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures. (See Page 8)

®

/

®

Hose

Heat Shield

f

Burner Venturi

Side

Burner

Valve

Valve

Nozzl_

29