Brinkmann 2700 owner manual Igniter Button Cap Alignment

Page 25

Igniter Button Cap

Alignment

Note: When performing Step 9, Lift grill body from front and rear panels to avoid injury to hands and fingers.

Step 9

With the help of a friend, place grill body assembly on grill cart. Grill body will rest between upper side sections of cart. Align front edge of grill body assembly with front edges of cart frame legs. Secure using four M6 X12mm bolts. At this point, fully tighten six bolts holding back panel from Step 4.

Note: To install battery, unscrew igniter button cap. Insert battery with positive end towards button. Replace igniter button cap.

24

Image 25

Contents Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingBefore Storing Your Grill Transporting and StorageBurner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceHardware CastingsProblem Possible Causes Burner will not light Trouble ShootingGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Tank Tray Assembly Spring Pin Grease Tray Bracket Igniter Button Cap Alignment Step Side Table Screw Holes Tool Drawer Step Pro Series 2700 Assembled Accessories Gallon PAN & Basket SET Warranty