Brinkmann 2700 owner manual

Page 5

The cylinder must also be equipped with:

A shut-off valve terminating in a Type 1 gas cylinder valve outlet.

A Type 1 valve that prevents gas flow until a positive seal is obtained.

An arrangement for vapor withdrawal.

A collar to protect the cylinder shut-off valve.

A safety relief device having direct communication with the vapor space of the cylinder.

A listed over-filling prevention device (OPD).

WARNING

Turn off the cylinder valve when your grill is not in use.

Handle the tank with care.

Always secure the cylinder in an upright position.

Never connect an unregulated LP gas cylinder to your grill.

DO NOT expose LP gas cylinders to excessive heat or ignition sources.

DO NOT store a spare LP gas cylinder under or near your grill.

Allow only qualified LP gas dealers to fill or repair your LP gas cylinder.

DO NOT allow the cylinder to be filled beyond 80% capacity.

Read and follow all warnings and instructions that are on the cylinder and that accompany this product.

DANGER

Never store a spare LP gas cylinder under or near your grill. This could cause excess pressure to be expelled through the vapor relief valve resulting in fire, explosion, or severe personal injury including death.

NOTE: PROPANE GAS IS HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS. PROPER VENTILATION IS EXTREMELY IMPORTANT.

Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from obstructions and debris.

DO NOT insert any foreign objects into the valve outlet. Damage to the back-check could result. A damaged back-check can cause a leak, possibly resulting in explosion, fire, severe bodily harm, or death.

4

Image 5
Contents Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Hose and Regulator Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Connecting Hose and Regulator to AN LP GAS Cylinder Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingBefore Storing Your Grill Transporting and StorageBurner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceHardware CastingsProblem Possible Causes Burner will not light Trouble ShootingHelpful Hints CleanlinessGrilling to Proper Temperature Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Tank Tray Assembly Spring Pin Grease Tray Bracket Igniter Button Cap Alignment Step Side Table Screw Holes Tool Drawer Step Pro Series 2700 Assembled Accessories Gallon PAN & Basket SET Warranty