Brinkmann 2210 Series owner manual Hose

Step 13

Attach the hose heat shield to the right side of the cart frame using two #8 self-tapping screws.

Step 14

Remove two bolts and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner table base, then firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 15.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures. (See Page 7)

Step 15

Attach the side burner valve with two M4 bolts with spring washers which come with valve. Then install the side burner control knob onto valve stem.

Hose

Heat Shield

Burner Venturi

Side

Burner

Valve

Valve

Nozzle

Side

Burner

Control

Knob

28