Brinkmann 2210 Series owner manual Side Burner Igniter

Page 30

Side Burner Igniter

Lead

Electrode

Grease Tray

Warming Rack

Cooking Grills

Porcelain Heat

Tents

Brackets

29

Step 16

Attach side burner igniter lead wire to the electrode as illustrated.

Step 17

Insert grease tray into opening on backside of grill. Make sure to slide tray onto tracks as illustrated.

Step 18

Place the porcelain coated heat tents on lower level of grill body assembly directly above burners.

Step 19

Place porcelain cast iron cooking grills on support ribs directly above porcelain heat tents.

Step 20

Place warming rack in brackets so that it sits above the cooking grills.

Image 30

Contents Gas Porcelain Outdoor Grill Important Safety For Your SafetyTable of Contents General Warnings Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Regulator Resetting Procedure Filling the LP GAS CylinderHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder Connecting Hose and RegulatorLeak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the Main BurnersMatch Lighting the Main Burners Lighting the Side Burner Match Lighting the Side BurnerTurning OFF the Grill Preheating the Grill Operating the GrillBreaking in Your Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerCleanliness Grilling to Proper TemperatureHelpful Hints Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCETransporting and Storage Cooking GrillsHeat Distribution Plates Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Hubcap Tank Heat Shield Plate Place grease cup in middle of hole in heat shield plate Grill Body Assembly Step Hose Side Burner Igniter ProSeries 2210 Assembled Warranty