HOW to Operate Your

O2-B™Portable Oxygen Bar

1.Familiarize yourself with this unit.

2.Place unit on a stable, ﬂat surface which is clean and free of dust. DO NOT set base on carpet or other soft surface. This could cause air ﬂow restriction and damage to unit.

3.Check to see that the Power switch is in the “OFF” position. Plug power cord into electrical outlet.

NOTE

Before attempting to start a cold unit, let the unit reach room temperature.

4. Press the Power Switch (at the rear lower position) to “I” (ON) position.

Power Switch “OFF” Position

Figure 4

Power Switch “ON” Position

Figure 5

5. Press the ON/OFF button ﬁrst and then press the Start Timer Button to start the unit.

NOTE

Do not use the O2-B™ Portable Oxygen Bar more than 30 minutes per session.

Start Timer Button

ON/OFF Button

Figure 6