OPERATION
arrow
push button
Info: The drawing board must be removed from the nebulizer
housing before use. To remove
1
the drawing board, push the button and slide the drawing
2
board in the opposite direction from the cover arrow.
Nebulizer Operation
sNOTICE: The
1.Ensure that the ON/OFF switch is in the OFF position.
2.Plug the power cord into a properly grounded electrical wall outlet.
3.Move the ON/OFF switch to the ON position to start the compressor.
4.Place the nebulizer mouthpiece between teeth and close mouth (or install the mask on face).
5.As aerosol starts flowing, inhale deeply and slowly through mouthpiece (or mask).
WARNING: Never use a nebulizer with a clogged nozzle. If the nozzle is clogged, the aerosol mist will be reduced, altered or stopped, which will diminish or eliminate the effectiveness of the treatment. If clogging occurs, replace the nebulizer.
Info: If you need to interrupt treatment, move the ON/OFF switch to the OFF position.
6.When the treatment is complete, move the ON/OFF switch to the OFF position to turn off the compressor.
7.Unplug the compressor from power outlet.
8.Disconnect nebulizer from tubing.
9.Clean nebulizer as instructed in MAINTENANCE/ Cleaning the Nebulizer Cup.
| 11 |