MAINTENANCE
Cleaning the Compressor’s Outer Case
WARNING: Electrical shock hazard. Do not remove the outer case of the device. All disassembly and maintenance of the device must be performed by a qualified service technician. Refer service to qualified service personnel.
WARNING: This device does not require oil. Do not attempt to lubricate any internal parts.
WARNING: Unplug device before cleaning. Do not submerge in water for cleaning.
Wipe the compressor's outer case with a clean, damp cloth weekly to keep it
Cleaning the Nebulizer Cup
All parts of the disposable nebulizer, except tubing, should be thoroughly cleaned after each use. If your physician specifies a specific cleaning procedure, follow that procedure.
WARNING: To prevent possible risk of infection from contaminated medication, clean the nebulizer after each treatment.
1.After each use, disassemble the nebulizer cup, T adapter and mouthpiece completely, wash all parts in warm soapy water, and rinse thoroughly. Allow to air dry. Store in a clean, dry location.
2.Once daily, after washing as above, soak nebulizer components in a fresh solution consisting of one part warm water and one part white vinegar for 30 minutes followed by a warm water rinse. Allow to air dry. Store in a clean, dry location.
Cleaning the Drawing Board
Wipe the drawing board outside cover with a clean, damp cloth weekly. Do not use any liquid, cleansers or soap on any surface of the drawing board.
| 14 |