Panasonic CS-MKE9NKU Unit Display and Operation Button, Heat red, DRY orange and Cool green mode

Page 50

UNIT DISPLAY AND OPERATION BUTTON

INDOOR UNIT

IMPORTANT

Avoid using radio equipment such as mobile phone near (within 4 ft. (1.2m)) the remote control receiver. Some radio equipment may cause malfunction of the unit.

If the trouble happens, disconnect power and restart the air conditioner after a few minutes.

OPERATION lamp

TIMER lamp

QUIET QUIET lamp

OPERATION button

REMOTE CONTROL receiver

REMOTE CONTROL receiver

This section picks up infrared signals from the remote controller (transmitter).

 

 

 

 

OPERATION button

When the remote controller cannot be used, pressing this button enables heating

 

and cooling operation.

 

 

 

 

 

Each time this button is pressed, the type of operation conducted is indicated by

 

the changing color of the OPERATION lamp. Press the button and select the

 

lamp color that suits your preference for operation.

 

 

Cooling operation

 

Heating operation

 

Stop

 

 

 

 

(green)

 

(red)

(lamp off)

OPERATION lamp

This lamp lights when the system is in the continuous AUTO (red or green),

 

HEAT (red), DRY (orange) and COOL (green) mode.

 

The OPERATION lamp lights up red and orange alternately when the system is

 

defrosting.

 

 

TIMER lamp

This lamp lights when the system is being controlled by the timer.

 

 

QUIET lamp

This lamp lights during operation in the QUIET mode.

NOTE

The unit’s display lamps are dimmed during operation in the NIGHT SETBACK mode.

6

Image 50
Contents DC Inverter MULTI-SYSTEM AIR Conditioner Safety Precautions Prohibit Table of Contents Applicable MULTI-OUTDOOR Units Operating Range CS-MKE7NKU Unit SpecificationsIndoor Unit 208V CS-MKE9NKU CS-MKE9NKU CS-MKE12NKU CS-MKE12NKU CS-MKE18NKU CS-MKE18NKU CS-MKE24NKU CS-MKE24NKU Indoor Unit CS-MKE7NKU Major Component SpecificationsIndoor Unit Indoor Unit CS-MKE9NKU CB-CS-MKE9NKUIndoor Unit CS-MKE12NKU CB-CS-MKE12NKUIndoor Unit CS-MKE18NKU CB-CS-MKE18NKUIndoor Unit CS-MKE24NKU CB-CS-MKE24NKUOther Component Specifications Temperature F CDimensional Data CS-MKE9NKU CS-MKE12NKUCS-MKE24NKU Refrigerant Flow Diagram Indoor unitAir Throw Distance Charts Performance DataCooling CS-MKE12NKU CS-MKE18NKU CS-MKE24NKU 8FA2-5251-11000-2 Electric Wiring DiagramsCS-MKE7NKU CS-MKE9NKU CS-MKE12NKU CS-MKE18NKU CS-MKE24NKU Emergency operation Auto Initial Operation Mode SelectionOperation Functions PAM- controlTimer backup Lamp colorsFreeze prevention Protective FunctionsOverload prevention during heating Cold-air prevention during heatingPrecautions before Performing Inspection or Repair Method of Self-DiagnosticsSelf-diagnostics Lamps Code Diagnosis ContentsReplace the circuit board or the fuse NormalReplace the controller Checking the indoor unit Control Check items unit operation Using the TEST/T-RUN terminalsChecking the Indoor and Outdoor Units How to Identify a Serial Communication Error Condition E12 Trouble Diagnosis of Fan Motor Indoor Fan MotorElectromagnetic interference Noise Malfunction and Electromagnetic InterferenceNoise malfunction Page CS-MKE7NKU CS-MKE9NKU CS-MKE12NKU Operating Instructions Split System Air Conditioner Safety Precautions FeaturesContents Product InformationElectrical Requirements Installation LocationSafety Instructions Page Outdoor Unit Names of PartsIndoor Unit Unit Display and Operation Button Heat red, DRY orange and Cool green modeThis lamp lights during operation in the Quiet mode DefrostingRemote Controller Display On Time Remote ControllerHour OFF Timer OFF TimeHeat On TIME/OFF Time settingAuto DRYHow to Install Batteries Using the Remote ControllerTemperature Display Selector Button Time Display Selector buttonReceiver which could block the signal Air Conditioner Indoor unit Receiver Remote ControllerTo take out the remote controller, pull it forward Rear Side HolePress the ON/OFF operation button Operation with the Remote ControllerStep Set the FAN Speed selector button to the setting you want Press the Mode selector button and select the desired modePress the TEMP. setting buttons to change the temperature Refer to Adjusting the Airflow Direction onAdjusting the Fan Speed Night Setback Mode is used for saving energy Cooling and DRY Mode Heating ModeQuiet Mode Special Remarks Operation Indication Setting the TimerExample To set to 1030 pm 1030 pm 710 am 1100 am Present time How to set the on time Example To start operation at 710 amTo cancel a timer program Press the Cancel button OFFCancellation procedure Using the 1-HOUR OFF TimerSetting procedure Operation together with the Daily ON/OFF Repeat TimerSweep Cool DRY Heat Adjusting the Airflow DirectionHorizontal When the air conditioner is not running Operation Without the Remote ControllerCare and Cleaning Press in the bottom right How to remove the filter 1. Grasp both ends of the airGroove Pin Air intake grille Wired Remote Controller Removing and remounting the air intake grilleTrouble Possible Cause Remedy Troubleshooting Before Calling for ServiceOperating Range Max DB / 71 F WB Min DB / 57 F WBSpecifications CS-MKE7NKU CS-MKE9NKU CS-MKE12NKUPage CS-MKE18NKU CS-MKE24NKU CS-MKE18NKU Automatic Restart Function for Power Failure Auto/High/Medium/LowInstallation Location Page Names of Parts Unit Display and Operation Button Hour clock with ON/OFF program Timer Selector button Press Button to reduce the set temperatureSetting changes by 1 C or 2 F each time one of the Temp OpenedRemote Controller Using the Remote Controller Rear Side Remote Control Holder Hole Mounting Screws 5/32 x 5/8 4 x 16 mm IncludedOperation with the Remote Controller Operation with the Remote Controller Adjusting the Fan Speed Cooling and DRY Mode Quiet Mode Special Remarks Setting the Timer Setting the Timer Using the 1-HOUR OFF Timer Adjusting the Airflow Direction Operation Without the Remote Controller Rear of the air intake grille Wired Remote Controller Troubleshooting Before Calling for Service CS-MKE18NKU CS-MKE24NKU Page 852-6-4190-583-00-0 Contents For Indoor Unit…In a Ceiling or Wall For safe installation and trouble-free operation, you mustPlease Read Before Starting …In a RoomWhen Servicing General Avoid Installation Site SelectionAdditional Materials Required for Installation Embedding the Tubing and Wiring Remove the Rear Panel from the Unit How to Install the Indoor UnitTrical wiring or conduits are Make a HoleIf Block, Brick, Concrete or Similar Type Wall Install the Rear Panel on the WallIf Wooden Wall CS-MKE7NKU, CS-MKE9NKU, CS-MKE12NKU Removing and Installing the Grille Indoor unit typesHow to replace the grille Indoor unit types CS-MKE18NKU, CS-MKE24NKU Wiring Instructions General precautions on wiring Shape the Indoor Side TubingWiring Instructions for Inter-unit Connections  For stranded wiring How to connect wiring to the terminal For Indoor UnitFor Outdoor Unit  For solid core wiring or F-cable Mounting  Right-side tubing Left-side tubing Switch the drain hose and drain capSwitching drain hose and drain cap Drain capTo unmount indoor unit Do not supply power toTubing and wiring to the out Unit or operate it until allHow to Test Run the Air Conditioner Remote Controller Installation Position Mounting on a WallAddress Switch Address Setting of the Remote ControllerConnecting a Home Automation Device Installation Check SheetPage DC1111-0
Related manuals
Manual 56 pages 332 b

CS-MKE24NKU, CS-MKE12NKU, CS-MKE18NKU, CS-MKE7NKU, CS-MKE9NKU specifications

The Panasonic CS-MKE series comprises a range of advanced air conditioning units designed to provide efficient cooling and heating solutions for both residential and commercial spaces. The models in this series include the CS-MKE18NKU, CS-MKE7NKU, CS-MKE12NKU, CS-MKE24NKU, and CS-MKE9NKU, each tailored to meet various needs while ensuring energy efficiency and user comfort.

One of the standout features of the CS-MKE series is its inverter technology. This innovative approach allows the air conditioner to adjust its compressor speed in accordance with the set temperature, leading to reduced energy consumption and lower utility bills. The inverter system operates smoothly, maintaining a consistent temperature without the bothersome on-off cycling typical of traditional units.

Moreover, the models in the CS-MKE range are equipped with the Plasma Quad Plus air purification technology. This feature effectively eliminates harmful particles and odors from the air, ensuring that the indoor environment is not only comfortable but also healthy. The air conditioning units can filter out dust, pollen, and various allergens, making them ideal for allergy sufferers or those with respiratory issues.

In terms of cooling and heating capacity, the CS-MKE series provides a versatile range. From the compact yet efficient CS-MKE7NKU, suitable for smaller rooms, to the robust CS-MKE24NKU designed for larger spaces, users can find an option that best suits their needs. Each model comes with adjustable airflow settings, allowing occupants to direct cool or warm air to where it's needed most, enhancing comfort levels.

The aesthetic design of the CS-MKE units is another appealing aspect. With their sleek and modern exterior, these air conditioners seamlessly blend into a variety of interior styles. Their ultra-quiet operation further enhances the user experience, making them suitable for bedrooms, offices, or any environment where noise reduction is a priority.

User-friendliness is a key characteristic of the CS-MKE series, boasting remote control features and programmable timers that allow users to set cooling or heating schedules, ensuring comfort upon arrival home while maximizing efficiency throughout the day.

Overall, the Panasonic CS-MKE series air conditioners, including models CS-MKE18NKU, CS-MKE7NKU, CS-MKE12NKU, CS-MKE24NKU, and CS-MKE9NKU, offer a blend of advanced technology, energy efficiency, and design sophistication, making them a commendable choice for any space.