![](/images/new-backgrounds/1256417/25641729x1.webp)
USING THE AC ADAPTER
NOTES: • Use only the authorized Omron AC Adapter, Model Number
•We recommend you install the batteries even if the AC Adapter is used. If no batteries are installed, you may need to reset the date and time if the AC Adapter is disconnected. The measurement results will not be deleted.
CAUTION
Use only Omron authorized parts and accessories. Parts and accessories not approved for use with the device may damage the unit.
TO CONNECT THE AC ADAPTER
①Insert the AC Adapter Plug into the AC Adapter Jack on the back side of the monitor as illustrated.
②Plug the AC Adapter into a 120V AC outlet (60 cycles).
TO DISCONNECT THE AC ADAPTER
Housing 2
1
Cord
①Hold and pull the Housing to remove the AC Adapter from the electrical outlet. Do not remove by pulling on the cord.
②Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
15