![](/images/new-backgrounds/1256423/2564239x1.webp)
Right hand measurement
➎Pull the cuff so that the top and bottom edges are tightened evenly around your arm.
➏When the cuff is positioned correctly, close the velcro fastener FIRMLY.
➐Make certain the cuff fits snugly around your arm. The cuff should make good contact with your skin.
You should be able to fit your index finger between the cuff and your arm easily, so you can pull the cuff off and on.
➑Relax your arm and turn your palm upward.
➒Be sure there are no kinks in the air tubing.
How to take a reading
Inflation
Deflation
English
➊Press the (O/I) button.
a)All display symbols appear for approximately one second.
b)When the monitor becomes ready to measure, the ( ) symbol appears on the display.
➋Press the (START
) button and remain still.
As the cuff begins to inflate, the monitor automatically determines your ideal inflation level. Because this monitor detects the pulse even during inflation, do not move your arm but remain still until the entire measurement completes.
•If you want to stop the inflation or measurement, press the (O/I) button. The monitor will stop inflating and start deflating rapidly, then the monitor will turn off.
➌Inflation stops automatically and measurement is started.
As the cuff slowly deflates, decreasing numbers
appear on the display and the ( ) symbol flashes at every heartbeat. In rare circumstances, a higher inflation may be necessary. In those cases, the monitor reinflates the cuff up to 30 mmHg higher than initial inflation and restarts the measurement.
8
9