Miele WT 945 S WPS Problem Possible cause Remedy Laundry is still, Damp after a drying, Cycle

	Problem solving guide
Problem	Possible cause	Remedy
The laundry is still	The load weighed less	In future dry small loads in
damp after a drying	than 1 kg. The moisture	a TIMED DRYING
cycle.	sensing system cannot	programme.
	operate with too small a
	load.
	When washing and	– Turn the WASHING and
	drying in one continuous	DRYING programme
	sequence:	selectors to the Finish
	during the spin the laundry	position.
	formed a ring in the drum	– Open the door and
	because the laundry was	loosen the laundry.
	distributed unevenly.	– Select a lower spin
		speed.
		– Start the drying
	When drying separately:	programme again.
	during the Thermospin the
	laundry formed a ring in
	the drum because the
	laundry was too damp or
	because the spin was set
	too high.
There is still water in	There is a blockage in the	Clean the fluff filter and the
the drum after drying.	water outlet.	drain pump as described in
		"Opening the drum door in
		the event of a blocked
		drain outlet and/or power
		failure".

49