Control panel, Start button | Miele wt945, WT 945 S WPS manual

Description of the appliance

Control panel

a Delay start button and display This is used to delay the start of a programme.

The delay time will appear in the display.

b "START" button

Press the Start button to start a programme.

The Start indicator lamp will flash as soon as a programme can be started.

c Door button Opens the drum door.

d I-ON / 0-OFF button

to switch the machine on and off and to interrupt a programme that is currently running.

e WASHING programme selector for selecting a basic wash programme and temperature. The programme selector can be turned clockwise or anti-clockwise.

f "Spin" button

for changing a spin speed or selecting

–Rinse hold or

–Without final spin.

g Additional option buttons

for selecting additional functions. When an additional option is selected the relevant indicator lamp will come on.

h DRYING programme selector for selecting the drying programme and the drying level required. The programme selector can be turned clockwise or anti-clockwise.

i Programme sequence Programme sequence indicator lamps show which section of the programme has been reached and fault / check indicator lamps.

10

Image 10

Miele wt945 Control panel, Start button, Door button Opens the drum door On / 0-OFF button, Additional option buttons

Contents

Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of the packing material Caring for the environmentDisposal of your old appliance or machine Technical safety Correct usage Use Using accessories Disposal of your old machine Features Description of the appliance Door button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttons Spin button with indicator lamps Important control panel featuresProgramme selector Washing and drying environmentally Flushing out the drum Before using for the first timeWater hardness reminder Cottons e Programme overviewMinimum Iron e f Woollens g Delicates fQuick wash Separate rinse StarchDrain / Spin Flushing out the drum How to wash correctly Tumble dry How to wash correctlyImportant other care symbols Ironing Before washing Separate washingSort the laundry Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plus Adding detergent At the end of a programme Adding and removing laundry Door cannot be opened, if Programme cycle Cottons Special features in the programme sequences Quick Wash Water softener Adding detergentDetergent Washing with several components Adding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starching Tips on drying Following fabrics should not be tumble dried Programme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. option Before drying Separate dryingPreparing the laundry Select a drying programme Programme selectionDrying / Low temp After drying Close the drum door Open the stopcock Add detergent Washing and drying in a continuous sequenceSelect the programme After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been locked Safety lock Safety lockEngaging the safety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine Cloth Clean the porthole glass Clean the siphon tube Cleaning the filter in the water inlet Problem solving guide What to do if ... ? Programme does not start Dept Wash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the wash General problems or an unsatisfactory wash or drying result Opened during or after OptionDrying When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a drying Machine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spin White residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powder Result Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to remove Blocked drain outlet Opening the drum door After sales service Appliance guarantee Installation and connection Front view Installation Installation surfacePlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machine Installation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hose Connection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Programmes Technical data Programmable functions for changing standard settings Programmable functions High water level Additional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S