Cleaning and care
Cleaning the filter in the water inlet
The machine has a filter to protect the water inlet valve.
The filter in the open end of the inlet hose should be checked and cleaned approx. every 6 months. It should also be checked after an interruption to the external water supply.
^First turn off the stopcock.
^Unscrew the threaded union connecting the free end of the inlet hose to the stopcock.
^Remove the rubber seal 1 from the recess.
^Using pointed pliers, take hold of the plastic filter 2 bar and remove.
^Clean the plastic filter.
Put the filter and seal back in the reverse order and reconnect the hose.
^Make sure it goes on correctly and is not
^Turn on the stopcock and check that the connection is watertight. If water drips out, tighten the connection.
Never forget to put the filter back in place after cleaning.
42
