Starch, Drain / Spin, Separate rinse | Miele wt945, WT 945 S WPS

WASHING

Programme overview

Starch

Fabric type	Table cloths, napkins, overalls, aprons.
Notes	– The laundry should be washed but not treated with
	fabric conditioner.
Max. load	5 kg
Drain / Spin
Notes	– Drain only: Select Without final spin.
Max. load	5 kg
Separate rinse
Fabric type	Articles which have been washed by hand and only need
	to be rinsed and spun in the machine.
Notes	– Do not use for woollens.
Max. load	5 kg
Flushing out the drum
Notes	– Fluff residues left in the drum after a Drying
	programme can be rinsed out.
	Important: there must be no items of laundry left in
	the drum! Always check that it is empty before
	selecting this option.

If "cold" is selected, the water is warmed to 24°C. This is to even out any fluctuations in the incoming water and helps the detergent to dissolve properly.

16

Image 16

Miele wt945 Starch, Drain / Spin, Separate rinse, Flushing out the drum, Important there must be no items of laundry left

Contents

Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of the packing material Caring for the environmentDisposal of your old appliance or machine Technical safety Correct usage Use Using accessories Disposal of your old machine Features Description of the appliance Control panel Start buttonDoor button Opens the drum door On / 0-OFF button Additional option buttons Spin button with indicator lamps Important control panel featuresProgramme selector Washing and drying environmentally Flushing out the drum Before using for the first timeWater hardness reminder Cottons e Programme overviewMinimum Iron e f Woollens g Delicates fQuick wash Starch Drain / SpinSeparate rinse Flushing out the drum How to wash correctly How to wash correctly Important other care symbolsTumble dry Ironing Before washing Separate washingSort the laundry Select a programme Detergent dispensing when selecting the soak option SoakPre-wash Water plus Adding detergent At the end of a programme Adding and removing laundry Door cannot be opened, if Programme cycle Cottons Special features in the programme sequences Quick Wash Adding detergent DetergentWater softener Washing with several components Fabric conditioners / starch formulations Fabric conditioners, texturisers and starchAdding fabric conditioner or liquid starch separately Separate starching Tips on drying Following fabrics should not be tumble dried Programme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. option Before drying Separate dryingPreparing the laundry Select a drying programme Programme selectionDrying / Low temp After drying Close the drum door Open the stopcock Add detergent Washing and drying in a continuous sequenceSelect the programme After each washing or drying programme Rinse out fluff programme To cancel a programme To cancel an incorrectly selected programmeChanging a programme sequence To change a programme which has been locked Safety lock Safety lockEngaging the safety lock Cleaning and care Cleaning the machineCleaning the detergent dispenser Cloth Clean the porthole glass Clean the siphon tube Cleaning the filter in the water inlet Problem solving guide What to do if ... ? Programme does not start Dept Wash programme stops and a fault indicator light comes on Indicator lamp flashes Locked indicator lampDuring a programme But the wash General problems or an unsatisfactory wash or drying result Opened during or after OptionDrying Problem Possible cause Remedy Laundry is still When washingWhen drying separately Damp after a drying Problem Possible cause Remedy Laundry is not Spun satisfactorilyMachine is not Steady during a spin Problem Possible cause Remedy There is an excessive Build-up of foamWhite residues which Look like powder Problem Possible cause Remedy Liquid detergent does Not give the requiredResult Remember to remove Blocked drain outlet Opening the drum door After sales service Appliance guarantee Installation and connection Front view Installation Installation surfacePlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machine Installation and connection Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hose Connection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Programmes Technical data Programmable functions for changing standard settings Programmable functions High water level Additional rinse for Cottons programme Buzzer Opening the door at high temperatures Factory setting Final residual moisture after dryingShortening the drying time Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S