Installation and connection
Connection to the drainage system
The machine drains via a drain pump with a delivery head of 1 metre.
The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.
Drain hose connection:
1. Direct into a sink.
Please note the following
–Hook the hose over the edge and secure.
–Make sure that the water can drain away freely without hindrance. Otherwise there is a risk of water overflowing or of some of the drained water being sucked back into the machine.
2. Connected securely to a plastic drain pipe with a rubber nipple. There is no need to use a
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
If required the drain hose can be extended to a length of 5 metres. The accessories required can be purchased from the Miele Spare Parts Dept.
For draining the water away with a delivery head over 1 metre (and up to a max. of 1.8 metres) a 2nd
65
