Programme does not start, Dept | Miele wt945, WT 945 S WPS guide

Problem solving guide

The programme does not start.

Problem	Possible cause	Remedy
The On indicator lamp	There is no power to	Check whether
does not light up in the	the machine.	– the door is properly closed.
programme sequence		– the mains plug is plugged
display or the START		– the mains plug is plugged
display or the START		in.
button indicator lamp		in.
button indicator lamp		– the mains fuse has blown.
does not flash.		– the mains fuse has blown.
does not flash.
If one of the following	There is a fault.	Start the programme again.
indicator lamps is		If the indicator light flashes
flashing		again, call the Miele Service
- Soak/Pre-wash		Dept.
- Washing
- Rinses
The "Locked" indicator	The safety lock is	De-activate the safety lock as
lamp is on.	activated.	described in the section
		"Safety lock".

44

Image 44

Miele wt945, WT 945 S WPS operating instructions Programme does not start, Dept

Contents

Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Technical safety Correct usage Use Using accessories Disposal of your old machine Features Description of the appliance Control panel Start buttonDoor button Opens the drum door On / 0-OFF button Additional option buttons Programme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Starch Drain / SpinSeparate rinse Flushing out the drum How to wash correctly How to wash correctly Important other care symbolsTumble dry Ironing Sort the laundry Separate washingBefore washing Select a programme Detergent dispensing when selecting the soak option SoakPre-wash Water plus Adding detergent At the end of a programme Adding and removing laundry Door cannot be opened, if Programme cycle Cottons Special features in the programme sequences Quick Wash Adding detergent DetergentWater softener Washing with several components Fabric conditioners / starch formulations Fabric conditioners, texturisers and starchAdding fabric conditioner or liquid starch separately Separate starching Tips on drying Following fabrics should not be tumble dried Programme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. option Preparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme To cancel a programme To cancel an incorrectly selected programmeChanging a programme sequence To change a programme which has been locked Engaging the safety lock Safety lockSafety lock Cleaning and care Cleaning the machineCleaning the detergent dispenser Cloth Clean the porthole glass Clean the siphon tube Cleaning the filter in the water inlet Problem solving guide What to do if ... ? Programme does not start Dept Wash programme stops and a fault indicator light comes on Indicator lamp flashes Locked indicator lampDuring a programme But the wash General problems or an unsatisfactory wash or drying result Drying OptionOpened during or after Problem Possible cause Remedy Laundry is still When washingWhen drying separately Damp after a drying Problem Possible cause Remedy Laundry is not Spun satisfactorilyMachine is not Steady during a spin Problem Possible cause Remedy There is an excessive Build-up of foamWhite residues which Look like powder Problem Possible cause Remedy Liquid detergent does Not give the requiredResult Remember to remove Blocked drain outlet Opening the drum door After sales service Appliance guarantee Installation and connection Front view Please note the following Installation surfaceInstallation Removing the transit fitting Screwing out and adjusting the feet Levelling the machine Installation and connection Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hose Connection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Programmes Technical data Programmable functions for changing standard settings Programmable functions High water level Additional rinse for Cottons programme Buzzer Opening the door at high temperatures Factory setting Final residual moisture after dryingShortening the drying time Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S