Problem solving guide
The wash programme stops and a fault indicator light comes on.
Problem | Possible cause | Remedy |
|
|
|
The Water inlet/drain | The water inlet system | – Turn the programme |
indicator lamp is | is blocked. | selectors to Finish. |
flashing and the load in |
| – Open the stopcock. |
the machine has not |
| – Select and start the |
been washed. |
| |
| programme again. | |
|
| |
|
|
|
The Water inlet/drain | There is a blockage in | – Clean the fluff filter and |
indicator lamp is | the water outlet. | the drain pump. |
flashing. |
| – Has the drain hose been |
|
| fitted too high? Maximum |
|
| delivery head 1.00 m. |
|
|
|
| The Waterproof system | – Call the Miele Service |
| has reacted. | department. |
|
|
|
The Final spin indicator | The final spin has not | – Loosen the laundry. |
lamp is flashing in the | taken place. The | – Turn the WASHING |
programme sequence | machine detected an | programme selector to |
display. | imbalance. | Spin. |
|
| – Make sure you select an |
|
| appropriate spin speed |
|
| for the type of load. |
|
|
|
45
