Final residual moisture after drying, Factory setting | Miele wt945

Programmable functions

Final residual moisture after drying

The machine is set to give the best drying results. You do, however, have the option of shortening or lengthening the drying time if you prefer.

Shortening the drying time:

by:	the display will
	show:
1 minute	I
2 minutes	2
3 minutes	3
4 minutes	4
Lengthening the drying time:
by:	the display will
	show:
1 minute	5
2 minutes	6
3 minutes	7
4 minutes	8
Factory setting:	0

Follow steps A to G to programme and store in memory.

The programmable functions are activated with the help of the additional option buttons and the WASHING programme selector.

Before you begin, first ensure that:

–the machine is switched off.

–the drum door is closed.

–the WASHING and DRYING programme selectors are at the Finish position.

APress the additional option buttons Soak and Pre-wash at the same time, hold pressed in and . .

B. . . switch the machine on with the I-ON /0-OFFbutton.

CThen release these buttons.

–The Soak/Pre-wash and Washing sequence indicator lamps will flash.

–A P will appear in the left of the display.

DTurn the WASHING programme selector to MINIMUM IRON 30°C .

EA number between 0 and 8 will appear in the display.

By pressing the START button repeatedly you can:

–shorten

the drying time in 1 minute steps:

I, 2, 3 or 4 will appear in the display;

–increase

the drying time in 1 minute steps, 5, 6, 7 or 8 will appear in the display;

–or accept the factory setting (0 will appear in the display).

FSwitch the machine off with the I-ON /0-OFFbutton.

The setting you have selected is now stored in memory.

GTurn the WASHING programme selector to the Finish position.

74

Image 74

Miele wt945 Final residual moisture after drying, Shortening the drying time, Lengthening the drying time, Factory setting

Contents

Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Technical safety Correct usage Use Using accessories Disposal of your old machine Features Description of the appliance Door button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttons Programme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Separate rinse StarchDrain / Spin Flushing out the drum How to wash correctly Tumble dry How to wash correctlyImportant other care symbols Ironing Sort the laundry Separate washingBefore washing Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plus Adding detergent At the end of a programme Adding and removing laundry Door cannot be opened, if Programme cycle Cottons Special features in the programme sequences Quick Wash Water softener Adding detergentDetergent Washing with several components Adding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starching Tips on drying Following fabrics should not be tumble dried Programme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. option Preparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been locked Engaging the safety lock Safety lockSafety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine Cloth Clean the porthole glass Clean the siphon tube Cleaning the filter in the water inlet Problem solving guide What to do if ... ? Programme does not start Dept Wash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the wash General problems or an unsatisfactory wash or drying result Drying OptionOpened during or after When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a drying Machine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spin White residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powder Result Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to remove Blocked drain outlet Opening the drum door After sales service Appliance guarantee Installation and connection Front view Please note the following Installation surfaceInstallation Removing the transit fitting Screwing out and adjusting the feet Levelling the machine Installation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hose Connection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Programmes Technical data Programmable functions for changing standard settings Programmable functions High water level Additional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S