Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
The four adjustable feet are used to
level the machine. All four feet are
screwed in when the machine is
delivered.
Screwing out and adjusting the feet
^Gently tip the machine and prop it up
using a solid wooden wedge for
example, to ensure stability.
,Make sure the machine does not
slip as this could cause injury.
^Loosen counternut 2with a
screwdriver by turning it
anti-clockwise, then unscrew foot 1
together with the counternut.
^Put the machine back on all four feet.
^Use a spirit level to check the
machine is standing level.
^Hold the foot 1firm using a pipe
wrench and using a screwdriver turn
the counternut 2to the right firmly up
against the housing.
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation and connection
59