Omron R7 instruction manual How to change the settings, Explanation of the graph display

R7 English

Explanation of the graph display

When the GRAPH button is pushed the latest measurement will appear in a flashing display. In the example the measurement is made on January 31 at 22:40. The graph shows 140 mmHg for systolic and 95 mmHg for diastolic (top and bottom of vertical bar) and a pulse rate of 90 beats a minute.

When you push the memory button in the graph display the details of the measurement will appear. Pushing the graph button again will bring you back the graph display. You

can use ( ) the arrows in the graph and memory display to leaf through the measurements.

Date of	Blood Pressure Values
Measurement	(systolic/diastolic) (mmHg)

	Pulse
Month/Days of a Week	Rate

The systolic blood pressure is higher than 170mmHg

When a systolic blood pressure above 170 mmHg is measured twice the ( ) symbol is displayed in the graph.

When a systolic blood pressure above 170 mmHg is measured three times the ( ) symbol disappears and the screen auto- matically changes to the “hypertension display”. The maximum displayed blood pressure value (y-axis) will change from 170 mmHg to 210 mmHg.

Detail Screen of Data

in Flashing Display

Display screen where the	Graph Display Screen of
systolic blood pressure	Hypertension Type
values higher than 170
mmHg are measured
twice

How to change the settings

The settings of your OMRON R7 blood pressure monitor can be changed according to your own preferences and comfort.

To enter the setting menu please press the SET button when your blood pressure monitor is

switched off. By using ( ) you can select your preference. By pressing the SET button again you lock your preference and proceed to the next item as shown in the figure. The on/off button can be used to switch the monitor off again.

13