?
HOW 702 WORKS
LifeSource Blood Pressure Monitors are easy to use, accurate and digitally display full measurement readouts. Our technology is based on the “oscillometric method” — a noninvasive blood pressure determination. The term “oscillation” refers to any measure of vibrations caused by the arterial pulse. The cuff is first inflated until the artery is fully occluded. Then, the monitor takes measurements while the cuff deflates. Our monitors exam- ine the pulsatile pressure generated by the arterial wall as it expands and contracts against the cuff with each heartbeat.
BEFORE YOU START
You must install 4 type AA (1.5 volt) batteries and attach the cuff to the monitor before using it. To install batteries (or replace them if the “Low Battery” symbol appears on display), proceed as follows:
1.Remove battery compartment cover
by gently pushing down on arrow and sliding cover forward.
2. Put in top row of batteries first. Place the batteries in compartment with positive (+) and negative
3. Replace cover by sliding it into
the compartment and gently pressing into place.
5 | ? | LifeSource Health Line |