Samsung BA-507S owner manual Troubleshooting, How To Fix It

Troubleshooting

Error/Symbol What Does It Mean?		How To Fix It
	Monitor may have been	Read page 17 (Applying
	inflated without the cuff	the Cuff).
	around the arm OR
	Cuff may not be postioned
	correctly on the arm.
	You may have moved	Read pages 15 & 16
	while the cuff was inflat-	(Important Reminders).
	ing, it is now attempting
	to reinflate. Check the
	cuff to make sure it’s
	positioned correctly.
	You may have moved	Remember that it is
	or spoken during the	important not to move
	measurement process.	and speak as it may ele-
		vate measurements.
	You may have been	Make sure you are in a
	startled by a noise or
	vibration while measur-	quiet and comfortable
	ing.	place when taking a
		measurement.

Troubleshooting

Error/Symbol	What Does It Mean?		How To Fix It
	You have been ignoring		Replace with four new
	the flashing replace		"AA" batteries. Make
	battery symbol (	).	sure the polarities are
			positioned correctly in the
			battery compartment
			before continuing to mea-
			sure your blood pressure.
	The batteries have run		Replace with 4 AA bat-
	down.		teries quickly so you may
			continue to measure your
			blood pressure without
			any interruptions.
Blood pressure	Cuff may not be aligned		Read page 17
value seems too	correctly.		(Applying the Cuff).
high or too low
The monitor keeps	Circuitry locked.		Remove then reinsert
reinflating			the batteries and then
			proceed to take
			measurement again.
Unable to take a	The cuff may not be		Read page 17
measurement	positioned correctly.		(Applying the Cuff).
after receiving an
error symbol.

22 Troubleshooting Troubleshooting 23