Switching Between F and C, Memory Recall

reading will be overwritten, as will each existing memory with the new reading, as they are taken.

4.For the most accurate temperature readings, wait 10 minutes between consecutive uses.

5.If a measurement falls within measuring range (89.6°F ~ 109.3°F or 32.0°C ~ 42.9°C), the temperature will be displayed. If a measurement is above measuring range, “Hi” will be displayed. If below measuring range, “Lo” will be displayed.

6.The measurement will be displayed for approximately one minute, then the 2216 will return to clock mode.

7.The digital display will shut off automatically three minutes after the last key press.

Switching Between °F and °C

To switch between measuring in °F and °C, insert an unfolded paperclip or similar object in the button hole labeled °C/°F on the back of the thermometer. (Fig. 2)

Memory Recall

Recorded readings may be scrolled through while the thermometer is on. To scroll through readings, press the “Memo.” button. If no reading is stored in any of the 30 available memories, the display will read “--”. To scroll through the readings rapidly, press and hold “Memo”. If no button is pressed for one minute, the 2216 will return to clock mode.