Datalogic Scanning C-BOX 200 installation manual Multidrop Address Selection, Rotary switches

DATALOGIC C-BOX 200

2.4.4 Multidrop Address Selection

For RS485 half-duplex interface connections, the scanner multidrop address should be set using the rotary switches placed inside the C-BOX 200.

The valid address range is from 00 to 31. This value is read only at power- on; any change at run-time has no effect.

If an invalid value is detected (32-99) the C-BOX cannot communicate with the Multiplexer and the green LED remains off. Furthermore, the SEND command configures the scanner using the previously configured valid scanner address.

TENS UNITS

Figure 2.10 - Rotary switches

Installation - 11