Datalogic Scanning C-BOX 200 guide

DATALOGIC

C-BOX 200

2.5 9-PIN SCANNER AUXILIARY SERIAL INTERFACE

The scanner auxiliary serial interface available on the internal 9-pin connector can be used either for configuration through WinHost or for data monitoring.

The details of the connector pins are indicated in the following table:

Figure 2.14 - 9-pin male connector

9-pin connector pinout

Pin	Name		Function
1			N.C.
2	RXA		Auxiliary RS232
3	TXA		Auxiliary RS232
4			N.C.
5	SGND		Signal Ground
6			N.C.
9			N.C.
		DS2100 - DS2400
7	CTSA		Auxiliary Handshake RS232
8	RTSA		Auxiliary Handshake RS232

		DS4300 - DS4600

7	SGND AUX		Auxiliary Signal Ground
8	GND		Ground

Installation - 15

Image 24

Datalogic Scanning C-BOX 200 installation manual PIN Scanner Auxiliary Serial Interface

Contents

BOX Installation Manual BOX 821000560 Contents Guide to Installation General View Figure a Figure B Safety Precautions Power Supply Viii General Features Description Installation Package Contents Opening the Device Opening the C-BOX Mechanical Installation Overall dimensions Mounting C-BOX Electrical Connections and Setup System layout Power Supply Power switch ON/OFF positions System Wiring System cable connections Refer to the scanner Installation Manual for details Chassis Grounding Jumper Settings Chassis grounding 10 Rotary switches Multidrop Address Selection 11 Termination resistance switch 5 RS485 Bus Termination Connection to a Multiplexer BOX 7 OM4000 Jumper Settings 13 OM4000 jumpers 14 9-pin male connector Pin connector pinout Name Function 9-PIN Scanner Auxiliary Serial Interface Scanner Requirements Operating Modes 1 GET/SEND Buttons GET Send LED Indicators 15 LED Indicators Technical Features Environmental Features