Datalogic Scanning C-BOX 200 installation manual 7 OM4000 Jumper Settings, 13 OM4000 jumpers

C-BOX 200 DATALOGIC

2.4.7 OM4000 Jumper Settings

J1 J2

Figure 2.13 - OM4000 jumpers

The jumpers allow connection to the EXT TRIG signals on separate spring clamp terminals for applications which use the OM4000 Oscillating Mirror in Trigger Mode.

They are used together and they have the following significance:

when a jumper is in the J1 position (see Figure above) pin 40 is connected to pin 27 (EXT TRIG+); a jumper in J2 position connects pin 20 to pin 28 (EXT TRIG-).

If the jumpers are removed pin 20 and pin 40 are disconnected.

14 - Installation