2. Preparation
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
2.2Setting the Date and Time
Set the monitor to the correct date and time before taking a measurement for the first time.
1. Press the H Date/Time setting ( ) button.
The year flashes on the V Date/Time display.
2. Push or button to change the year.
Push | button to confirm the year and then the month flashes. Repeat the same | |||
steps to change the month, day, hour, and minutes. |
| |||
Year |
|
|
|
|
|
| Month |
|
|
|
|
| Day |
|
Change | Confirm |
|
| Hour |
: Forward | Change | Confirm | Minute | |
| ||||
|
|
| ||
: Back |
| Change Confirm |
| |
|
|
|
| Change Confirm |
Change Confirm
3. Press the START/STOP button to turn the monitor off.
Notes:
8 | • If the batteries have been replaced, the date and time setting will need to be reset. |
• If the date and time are not set, |