Omron M3 instruction manual Using the Memory Function

Page 12

3. Using the Unit

3.4Using the Memory Function

The monitor automatically stores the result up to 60 sets. It can also calculate an average reading based on the measurements from the last three readings taken within 10 minutes. If there are only two readings in memory for that period, the average will be based on two readings. If there is one reading in memory for that period, the average will be based on one reading.

Notes:

If the memory is full, the monitor will delete the oldest readings.

When viewing the reading taken without setting the date and time, “-:--” is displayed instead of the date and time.

Average Value

Previous Reading

Alternating date/time display

 

 

Old

Recent

View the Average

View the Previous

View the Readings

Value

Reading

Stored in Memory

If the previous reading was taken without setting the date and time, the average value is not calculated.

The Memory number appears for a second before the pulse rate is displayed. The newest set is numbered “1”.

10

Image 12
Contents Model M3 Contents Important Safety Information General UsageImportant Safety Information Overview Main unitInstalling/Replacing Batteries PreparationSetting the Buzzer/ Date and Time Press the O/I Start button to store the settingUsing the Unit Applying the Arm CuffHow to Sit Correctly Cuff wrapping guideTaking a Reading Press the O/I Start buttonUsing the Unit Using the Memory Function To delete all the values stored in memory Troubleshooting and Maintenance Icons and Error MessagesTroubleshooting and Maintenance Troubleshooting Problem Cause RemedyTroubleshooting and Maintenance Maintenance Calibration and ServiceStorage Place the arm cuff and main unit in the storage caseOptional Parts Medium Arm Cuff Large Arm Cuff AC Adapter STechnical Data Power SourceTechnical Data Technical Data Some Useful Information about Blood Pressure Why is it a Good Thing to measure Blood Pressure at Home? Some Useful Information about Blood Pressure