Omron M3 Setting the Buzzer/ Date and Time, Press the O/I Start button to store the setting

Page 7

2. Preparation

2.2Setting the Buzzer/ Date and Time

1.Press the button.

2.Set the Buzzer.

1)	Push or	buttons to
	select On or Off.
2)
2)	Push the	button to confirm.		Off
			On	Off

3. Set the monitor to the correct date and time before taking a measurement for the first time.

EN

1)	Push or	buttons to
	change.
2)	Push the	button to confirm.	Year	Month	Day Hour
	Next setting appears.			Month
	Next setting appears.					Minute
						Minute

4. Press the O/I START button to store the setting.

Notes:

•If the batteries have been removed for 30 seconds or more, the date and time setting will need to be reset.

•If the date and time are not set, “-:--” appears during or after measurement.

5

Image 7

Contents Model M3 Contents General Usage Important Safety InformationImportant Safety Information Main unit OverviewPreparation Installing/Replacing BatteriesPress the O/I Start button to store the setting Setting the Buzzer/ Date and TimeApplying the Arm Cuff Using the UnitCuff wrapping guide How to Sit CorrectlyPress the O/I Start button Taking a ReadingUsing the Unit Using the Memory Function To delete all the values stored in memory Icons and Error Messages Troubleshooting and MaintenanceTroubleshooting and Maintenance Problem Cause Remedy TroubleshootingTroubleshooting and Maintenance Calibration and Service MaintenancePlace the arm cuff and main unit in the storage case StorageMedium Arm Cuff Large Arm Cuff AC Adapter S Optional PartsPower Source Technical DataTechnical Data Technical Data Some Useful Information about Blood Pressure Why is it a Good Thing to measure Blood Pressure at Home? Some Useful Information about Blood Pressure