Omron M24/7 instruction manual Important Safety Information

Page 4

Important Safety Information

Important Safety Information

This symbol on the Omron M24/7 monitor is a warning that you should read the accompanying documentation (this manual).

Warning:

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

The ambulatory blood pressure monitor should not be used if any of the following cases apply:

patients without an indication for ambulatory blood pressure monitoring

non-cooperative patients

patients in any way unable to operate a monitor as intended

patients requiring urgent / emergency cardiac care

unconscious or otherwise incapable patients

patients with serious mobility impairments without supervision

patients with coagulation disturbances

children without supervision

children under the age of 8 years

Though the blood pressure measurement algorithm used in the OMRON M24/7 has been tested and found to function properly on patients with atrial brillation or other common arrhythmias, the oscillometric blood pressure measurement method is generally recommended for use only with special caution in patients with arrhythmias, Parkinson’s disease, or other diseases with tremor.

Always consult a physician for the interpretation of the blood pressure measurements. Note that any blood pressure recording may be affected by the body position, the physiological condition of the patient, and other factors.

Take care to avoid blocking the air ow in the tube of the cuff and twisting the tube. Make sure the cuff and its tubing do not cause strangulation or a circulation problem. Should the patient experience arm numbness or pain remaining after any blood pressure reading is completed, the cuff should be removed to avoid permanent vascular or neural injury.

4

Image 4
Contents M24/7 Ambulatory Blood Pressure Monitor Introduction Content Important Safety Information Important Safety InformationDamage to the equipment or other property Indications Recommended use of ambulatory blood pressure monitoringContraindications Overview Main UnitArm Cuffs Front sidePackage Contents DisplayUsing the Buttons Cancel a blood pressure measurementOperating Instructions Working with the Omron M24/7 UnitSwitching the device off Switching the device onBattery voltage check LCD checkOverview Display Set by PCRules of Monitoring Monitoring Step by StepNot required to repeat with each session Preparation of Monitoring SessionEvaluation Start the Omron BP Tracker SoftwareManual Programming Programming OptionsMeasurement Timing Manual Programming Step by StepBatteries SoftwareCuffs and their application Care and Maintenance Handling Errors and ProblemsProtection, cleaning and washing Maintenance and Storage Conditions AccessoriesRegular checks, warranty, service Correct Disposal of this ProductTechnical Data Technical parametersSafety Concerns Electric shock hazard protectionBiocompatibility Hazardous materialsEMC Information Emission test Compliance Electromagnetic EnvironmentPage Recommended Separation Separation distance in function of the frequency Recommended separation distance=3.5/E Transmitter W Ambulatory Blood Pressure Monitoring Product Warranty Information Remarks