
3. Using the Unit
3.3Taking a Reading
The unit is designed to take measurements and store the measurement values in the memory for two people using user ID A and user ID B.
The unit can also be used to take a single measurement for other persons using the guest mode. The user ID symbol is not displayed when using the guest mode. Measurements taken using the guest mode are not stored in the memory.
Using the Guest Mode
1.Press and hold the O/I START button until the A and B user symbols disappear from the display.
A and B display goes out
Press for at least 3 seconds
EN |
2.Release the O/I START button.
The cuff starts to inflate automatically.
Note: To stop the inflation press and release the O/I START button. The unit will stop inflating, start deflation and turn off.
3.Inflation stops and the measurement is started. When the measurement is completed, your blood pressure and pulse rate appear on the display.
21