3. Using the Unit
The second measurement starts automatically.
The second measurement is complete, waiting to start the next measurement.
The third measurement starts automatically.
The consecutive measurements are complete. The average for the three measurements appears on the display.
The three individual measurement results are not displayed while Auto Mode is taking the measurements. However, the results for each individual measurement can be displayed after all the measurements have been completed.
Note: During the Auto Mode the unit will repeat the measurement in case of an error. After 3 errors the unit will stop taking further measurements. If only two measurements are successful the average of these two measurements will be displayed. If only one measurement is successful, this result will be displayed.
5.Press the SET button to display the blood pressure and pulse rate for the first measurement. Press the SET button again to display the next measurement.
6.Press the O/I START button to turn the unit off.
28