3.Using the Unit
5.Press the SET button to confirm the change.
The number of seconds between each measurement is displayed.
Note: The default value between each measurement is
60seconds.
6.Press the MEMORY button ( 
) to change the interval of time between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds
or 120 seconds. Continue to press the MEMORY button (
) until the desired interval appears on the display.
7. Press the SET button to confirm the setting.
The year flashes on the display.
8. Press the O/I START button to turn the unit off.
26