3. Using the Unit
3.5Using the Memory Function
The unit is designed to store the blood pressure and the pulse rate in the memory for two people (user A and user B) every time a measurement is completed.
The unit automatically stores up to 84 sets of measurement values (blood pressure and pulse rate) for each user (A and B). When 84 sets of measurement values are stored, the oldest record is deleted to save the most recent values. The unit also stores 8 weeks of morning averages and 8 weeks of evening averages for each user (A and B).
Average Function
The unit calculates the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading.
Note: If two sets of measurement values are stored in the memory for the 10 minutes period, the average is based on the two sets of measurement values. If one set of measurement values is stored, this is displayed as the average.
To Display the Measurement Values
1.
2.
Select your user ID (A or B).
Press the MEMORY button (
).
The average value is shown and the average symbol (
) appears above the memory symbol (
) on the display.
32