Philips FW930P2/2, FW930SR manual Easy Set, Demonstration mode, Switching the system on

MINI HIFI SYSTEM

PROGRAM SHUFFLE			STEREO
REPEAT	REC		BACK
NEWS T.A. AM MW FM LW			FRONT HSD
	60Hz 250Hz 500Hz	1KHz	2KHz 4KHz 8KHz

STANDBY							DOLBY B
ON							NR
							RDS
							RDS
CLOCK/	CD1 • 2 • 3	BAND	TAPE 1 • 2			CDR	NEWS/TA
TIMER
	CD	TUNER	TAPE			AUX	VOLUME
	PROG	STOP•CLEAR	SIDE A•B	▲	PRESET ▲		A..REVREV
	SEARCH • TUNING		PLAY PAUSE	PREV		NEXT
DUB
(HSD)
							MIC
REC		SOUND NAVIGATION					LEVEL
	INCREDIBLE		DYNAMIC BASS				MIC
		SURROUND	BOOST

DIGITAL

SOUND CONTROL

Easy Set

EASY SET allows you to store all available radio stations and RDS stations automatically.

1 Press and hold STANDBY ON (on the

system only) for 5 seconds; when the

system is in standby or demonstration

mode.

ª “EASY SET” will be displayed,

and followed by “TUNER” and then

“AUTO”.

ª EASY SET will start searching for all

radio stations with RDS and then

followed by radio stations on FM,

MW and LW band respectively.

OPERATING THE SYSTEM

ªWhen RDS time is read, “RDS TIME” will be displayed. The current time will be displayed for 2 seconds and stored automatically.

Notes:

– EASY SET will start with the RDS

station, if there are still presets

available, it will continue to store the

FM, MW and LW bands respectively.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station or the first

available RDS station will appear on the

display when EASY SET is completed.

– If RDS station does not transmit RDS

English

Important:

Before you operate the system, complete the preparation procedures.

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically.

Notes:

–During the demonstration, if you press any source (or standby-on) button, the system will switch to the respective mode (or standby).

–When the system is switched to standby mode, the demonstration will resume 5 seconds later.

To stop the demonstration mode

•Press and hold STOP•CLEAR ‚(on the system only) for 5 seconds when the system is in demonstration mode.

ªThe demonstration will stop.

ª"DEMO OFF" is displayed.

ªThe system will switch to standby mode.

Note:

–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.

To start the demonstration mode

•Press and hold STOP•CLEAR ‚(on the system only) for 5 seconds when the system is in standby mode.

ª The demonstration will begin.

ª All available RDS and radio stations

with sufficient signal strength will be

stored. Up to 40 presets may be

stored.

2 The system will proceed to set the RDS

time automatically with the stored RDS preset station.

•If no RDS station is available in the first preset station, the program will exit automatically.

ªAfter a radio station is found,

“EASY SET” will be displayed and followed by “TIME”

•When searching RDS time;

ª“SEARCH RDS TIME” will be displayed.

time within 90 seconds, the program

will exit automatically and the display

will show “NO RDS TIME”.

Switching the system ON

•Press STANDBY ON (on the system only), CD, TUNER, TAPE or AUX.

You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.

11