START 
Continue to press button
705CP-II English
When the measurement is complete, the cuff completely deflates and your blood pressure and pulse rate are displayed.
NOTE :
The monitor automatically stores blood pressure and pulse rate into the memory.
•When 28 sets of readings are stored in memory, the oldest set will be deleted to store a new set.
Press the (O/I) button to turn the monitor off.
NOTE :
If you forget to turn the monitor off, it will automatically shut itself off after five minutes.
Instructions for special conditions:
•If your systolic pressure is known to be more than 220 mmHg, press and hold the (START 
) button until the monitor inflates 30 to 40 mmHg higher than your suspected systolic pressure.
NOTE :
Do not apply more pressure than necessary.
The monitor will not inflate above 300 mmHg.
9