How to connect the printer unit
How to load the printer paper
705CP-II English
Remove printer cable plug from the printer unit.
Connect printer cable plug cord to the main unit. The circle on the cable plug should face up.
Open printer cover in the direction indicated by the arrow symbol and remove paper roll from the main unit.
Peel of the glued edge of the printing paper included with the unit, and cut the first 10 cm (4 inch) with a pair of scissors.
Press theinserting the edge of the printing paper into the paper feeding slot. When the edge of the paper protrudes sufficiently, release the
Close the plastic printer cover. Make certain that the paper sticks out from the top when the cover is replaced.
Thermal sensitive paper is supplied with the unit. Use only thermal paper of similar size (width approx. 38mm) and roll diameter (not to exceed approx. 26mm)! These rolls of paper can be ordered from OMRON. Printer paper can be ordered by your OMRON shop or distributor.
19