Introduction, Installation, Unpacking | Omega Engineering OS1592

OS1592 Infrared Fiber Optic Thermometer/Transmitter 1

INTRODUCTION

The new OS1592 series Infrared Fiber Optic Thermometer/Transmitter provides non-contact temperature measurement for industrial applications. The unit measures temperature starting at 260°C (500°F) and up to 2482°C (4500°F). It provides dual analog outputs (4-20 mA, 0-5 VDC, 0-10 VDC, 1 mV/Deg, J & K type T/Cs) electrically isolated from the main input DC power supply. The 1 mV/Deg analog output is standard on all units.

The main electronics is in a NEMA-4 rated Die cast Aluminum housing, with a local backlit LCD, built-in Relay, Alarm LED, and a 4 position programmable keypad.

The unit accommodates any of the following assembly types:

•Optical Assembly

•Ceramic Tip Assembly

•Polymer Bolt Assembly

INSTALLATION

2.1 Unpacking

Remove the packing list and verify that you have received all your equipment. If you have any questions about the shipment, please call Customer Service at

1-800-622-2378 or 203-359-1660. We can also be reached on the internet:

www.omega.com e-mail: info@omega.com

When you receive the shipment, inspect the container and equipment for any signs of damage. Note any evidence of rough handling in transit. Immediately report any damage to the shipping agent.

NOTE:

The carrier will not honor any damage claims unless all the shipping materials are saved for inspection. After examination and removing contents, save packing material and carton in the event reshipment is necessary.

The following items are supplied in the box:

•OS1592 Infrared Fiber Optic Thermometer/Transmitter

•The corresponding Optical Assembly

•User’s Manual