Omega Engineering OS1592 manual Resetting Temperature Values, Cover

Page 11

3OS1592 Infrared Fiber Optic Thermometer/Transmitter

0-5VDC:

Measured Temp = [ (Voltage Output ) x (T2 - T1)] + T1

 

5

0-10VDC:

Measured Temp = [ (Voltage Output) x (T2 - T1)] + T1

 

10

Where,

T1 is the minimum temperature range

 

T2 is the maximum temperature range

3.5 - Resetting Temperature Values

The calculated temperature values (Min, Max, and Diff) can be reset at any time by pressing the SET key in either the MAX, MIN, or DIF display modes. This will reset the calculated temperatures as follows:

MAX = Current Temperature

MIN = Current Temperature DIF = 0

After the reset, the unit starts to keep track of the Maximum, Minimum, and Differential temperatures.

The following figures show the Main Housing, Optical Assemblies, Mounting Bracket, and Air purge Collar.

89.99

(3.543)

77.90

(3.067)

71.93

(2.832)

Dimensions mm (in.)

5.72(0.225) DIA.

(4) HOLES

5.08 (0.20)

59.72

77.09

103

115

(2.351)

(3.035)

(4.057)

(4.535)

MAIN HOUSING

9.78(0.385) DIA. x

47.50 (1.870) DEEP

(2)PLACES

COVER

51.31

(2.020)

Figure 4 - NEMA-4 Aluminum Enclosure

6

Image 11
Contents User’s Guide Servicing North America WARRANTY/DISCLAIMER Table of Contents Figures Table of FiguresUnpacking InstallationIntroduction Following describes the ordering information OS1590 Series Electrical ConnectionOperation Visual Functional Flow ChartTurning on the Display Backlight Changing the Temperature from F to C or vice versaUsing the Alarm Function Analog Output vs. TemperatureCover Resetting Temperature ValuesOptical Lens Assembly L1 .25 @ 8 FOV Model Optical Assemblies SpecificationsAnalog Outputs Maintenance Safety Warnings and IEC Symbols Shop online at omega.com