Samsung LE32S62, LE37S62 Listening to the Sound of the Sub Picture, Connecting Headphones, Press

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub picture.

1.	Press the MENU button to display the menu. Press the  or  button to
	select “Sound”, then press the ENTER button.
2.	Press the  or  button to select “Sound Select”, then press the ENTER	button.
3.	Press the  or  button to select “Sub”. Press the ENTER	button.

4.Press the EXIT button to exit.

Main: Used to listen to the sound of the main picture.

Sub: Used to listen to the sound of the sub picture.

You can select this option when the “PIP” is set to “On”.

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting

the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2.Press the  or  button to select “Reset”, then press the ENTER button.

3.Press the EXIT button to exit.

You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port,

you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu. Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system.

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when

you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1.Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “Time”, then press the ENTER button.

3.Press the ENTER button to select “Clock Set”.

4.
	To...		Press the...
	Move to “Hour” or “Minute”		 or  button.
	Set the “Hour” or “Minute”		 or  button.
	Press the ENTER	button.

5.Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

English-17