Samsung LE37S62 manual Switching On and Off, Placing Your Television in Standby Mode, Plug & Play

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2.Press the button on the front of the set.

You also can press the POWER button or the TV () button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically.

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2.To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. 

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  button. Press the ENTER button to confirm your choice.

3.The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

4.Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice.

5.The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the ENTER button at any time to interrupt the memorization process.

6.Press the ENTER button.

Select the “Hour” or “Minute” by pressing the  or  button. Set the “Hour” or “Minute” by pressing the  or  button.

You can also set the hour and minute by pressing the number buttons on the remote control.

7.Press the ENTER button to confirm your setting.

Language: Select your language.

Country: Select your country.

Auto Store: Automatically scans for and stores channels available in the local area.

Clock Set: Sets the current time for the TV clock.

English-