Citizen CH-656C Precautions for maintenance, Nature and frequency of maintenance

Page 4

Congestion, swelling, etc. may occur in some people.

If blood pressure is measured repeatedly, an accurate result will not be achieved. An inter- val of about 10 minutes should be allowed.

The memory is erased if the batteries are re- moved for replacement, etc. and a record should be kept of any necessary data.

Precautions for maintenance

Do NOT store the blood pressure monitor where it will be exposed to direct sunlight, high temperature (over 60˚C), low temperature (be- low –20˚C), high relative humidity (over 95%) or in a dusty place.

Do NOT expose the blood pressure monitor to under force or vibration, or drop it.

Remove the battery/batteries when not in use for a long period.

Do NOT disassemble the apparatus.

Do NOT bend the cuff or air hose unnecessar- ily.

NEVER wipe the blood pressure monitor with thinner or benzene, as they may damage it.

When the monitor is very dirty, wipe it clean with a cloth moistened with Sterilizing alcohol or a neutral detergent, and then wipe it with a dry cloth. Do NOT use thinner or benzene.

Nature and frequency of maintenance:

This products is designed for use over an ex- tended period of time; however, it is generally recommended that it be inspected every two years to ensure proper function and performance.

Protect the nature environment:

Please help protect natural environment by re- specting national and/or local recycling regula- tions when disposing of the batteries and the products at the end of their useful lives.

- Eng 4 -

Image 4
Contents Model CH-656C Cleaning Method of Cuff General RemarksDiastolic Systolic Blood PressurePrecaution for USE and Maintenance Precautions for useFor proper measurement of blood pressure Do not measure blood pressure after bathing or drinkingPrecautions for maintenance Nature and frequency of maintenanceProtect the nature environment Congestion, swelling, etc. may occur in some peopleIdentification of Parts Diastolic blood pressure Pulse display sectionMeasurement Procedures Battery ReplacementAttaching of wrist cuff Press the Power/Start switch To start the MeasurementPressurization and measuring start When there are already 7 sets of results Automatic power-off functionSecond Memory recall Memory clear function Description of Display Marks Consumer Electronics Division